Error ID number: c1030af0
Error Message

The operation failed due to an invalid format in the HTTP request. Verify that the host header is correct for the virtual server.

Possible Causes

This error can occur if you have multiple IP addresses bound to the network card on the Exchange server and you have the default Web site bound to the secondary IP address.

An invalid host header or IP address has been set for the default Web site

Incorrect IP addresses or host header is set on the cluster virtual server.

Troubleshooting

Try setting the default Web site to All Unassigned and then reopen the ESM and try to expand public folders.

Correct the host header value or remove it completely.

親愛的 XXXXX，您好!
有鑒於網路釣魚程式氾濫，造成使用者的帳號、密碼都有被盜用的可能，即日起 PChome 郵件服務小組將針對使用 POP3 郵件服務用戶進行定期回訪機制，以確保提供您更安全的電子郵件服務。
當您收到此封「PChome 電子郵件回訪通知信」表示您 再過 7 天就屆滿持續超過 30天 沒有登入PChome 電子郵件網站；請您於收到此封郵件後，立即點選本 "立即回訪" 連結完成回訪認證作業，確保您的 POP3 郵件功能可以繼續正常使用。
若您回訪登入忘記密碼時，請到「PChome 會員中心」網站，左下 menu「忘記密碼」，任選一種方式查詢密碼；若需再協助查詢者，請提供您的姓名、身分證字號、暱稱、生日、電話、地址及聯絡信箱等會員資料， 連絡『客服中心』備查。

為保障個人會員權益，建議您養成固定變更密碼的好習慣。變更密碼時，請到「PChome 會員中心」網站，系統會要求您再登入一次，重新登入後，請到左下 menu「更改密碼」，請同時變更密碼與秘密提示問題的內容，因為這兩者可能互有關聯。

若您沒在 2009年06月20日 23:59 此期限內完成回訪認證，系統將暫停您使用 POP3 功能，直到您下回登入PChome 電子郵件網站後，才會重新恢復啟用。請您務必定期於30天內登入PChome 電子郵件網站，以讓POP3功能正常運作，收發信件暢通無阻！感謝您對 PChome 網路家庭服務的支持與愛護！  

裸女教電腦 網友噴血學組裝
更新日期:2009/05/17 04:09
〔記者吳岳修／台北報導〕不會組裝電腦嗎？網路流傳一封名為「女大生脫衣實地操作教你電腦基本DIY」的KUSO文章，一名女子寬衣解帶，以圖解方式教導網友如何組裝電腦，不少網友瘋狂點閱轉載，留言直呼「太勁爆了！」

電腦專家Luis表示，圖片中的電腦屬Intel P3等級的古董，現在已經不必用螺絲起子裝風扇，而且圖中用腳裝RAM也是搞笑作法，大家笑笑就好，不必當真。

這篇文章被轉載在各大電腦討論區及論壇，總共分成13個步驟，配合文字說明，從最重要的主機板開始，女子逐一介紹CPU、散熱風扇、RAM、硬碟、光碟機等零組件，配合女子脫去胸罩，擺出各種撩人性感姿勢，並以電腦組件巧妙地遮住重點部位，讓網友們看得血脈僨張。

更令網友們充滿無限想像的是，每張圖片還都附上充滿性暗示的組裝說明，「要注意方向喔，CPU可是不接受69式的」、「接下來要插入的就是這個RAM」等雙關用語，讓網友們直呼受不了。

電腦專家則指出，電腦零件並不便宜，建議初學者最好不要自行組裝，以免造成零件損壞。

http://kb.vmware.com/selfservice/microsi...
This error is seen because the VMware virtual bridge can operate at any speed and is constrained only by the processing power of the host computer's processor. When traffic is sent from the guest to the host it can be sent at very fast speeds.  Windows Server 2003 includes security features that interpret network requests at speeds above a specified limit as denial of service attacks. In response, Windows Server 2003 disconnects the client — in this case, the guest VM.  Once it is disconnected Windows will not allow it to connect again.

There are several ways you can avoid such disconnections. Use the one that is most convenient in your environment.

Use the bandwidth limiting feature of VMware Workstation 5 (this workaround does not apply to GSX Server). Using a text editor, add two lines to the configuration (.vmx) file of the affected virtual machine.

If the physical Ethernet adapter on the host computer is running at 100Mbps, use the following two lines:
ethernet0.txbw.limit=100000
ethernet0.rxbw.limit=100000

If the physical Ethernet adapter on the host computer is running at 10Mbps, use the following two lines:
ethernet0.txbw.limit=10000
ethernet0.rxbw.limit=10000

In both examples above, the setting affects the virtual machine's first virtual Ethernet adapter (ethernet0). To modify the setting for a second virtual Ethernet adapter, substitute ethernet1. For a third virtual Ethernet adapter, use ethernet2.

This approach increases the load on the host computer's processor and may affect performance.

Disable large send offload in the network settings for the physical Ethernet adapter on the host computer. Note: This is host operating system dependent, not a VMware setting.

This approach increases the load on the host computer's processor and may affect performance.

Use a gigabit switch. Connecting the host computer's network adapter to a gigabit switch helps because the bridge cannot produce traffic that exceeds the 1000Mbps speed of the switch. This workaround provides the highest throughput when you copy large files.

Change the configuration of the virtual machine to use host-only networking. This change is simple to make and may be appropriate for some virtual machines.

Disable or change the Windows Server 2003 settings on the host to disable the security feature.  Note: this may increase the security risk of the host as it affects connections to external hosts as well.  See: http://support.microsoft.com/kb/898468 for instructions on how to do this.